How do you mix ONR for clay lube?

Can I use ONR as clay lube?

To mix up a 32 oz bottle of clay lube you would use 1 tablespoon (15ml) of ONR.

How do you mix ONR?

Mix up a bottle of ONR at a ratio of 64:1 of water: product. Spray the solution liberally onto the panel and onto the clay directly. Clay the car as normal using light-pressure and straight-line motions and fold the clay to expose a fresh, clean side when necessary. Rinse the car and dry when complete.

How do you make clay bar lubricant?

Yes, soapy water makes a very decent clay lubricant! It’s by far the cheapest way to do it and you likely already have some in stock, so you can mix it up right now. After you wash the car, mix the same proportions of car shampoo and water in a clean bucket or spray bottle and apply generously to the surface.

Can you dilute clay lube?

As with quick detailers, you can dilute them down further with water and they will still act as a great lubricant.

Can I use ONR as clay lube?

To mix up a 32 oz bottle of clay lube you would use 1 tablespoon (15ml) of ONR.

How do you mix ONR?

Mix up a bottle of ONR at a ratio of 64:1 of water: product. Spray the solution liberally onto the panel and onto the clay directly. Clay the car as normal using light-pressure and straight-line motions and fold the clay to expose a fresh, clean side when necessary. Rinse the car and dry when complete.

What lubricant can I use with clay bar?

Obviously, rubbing a clay bar with sand embedded will scratch the painted surface! It is also important to lubricate the surface and the clay bar before using. One can either use a quick detailer product or a water/automotive wash solution as a lubricant during the clay bar process.

See More:  How do detailers clean leather seats?

How much ONR should I use?

After you poured your distilled water into your 1 gallon container, you need to add . If you do not have measuring cups, you can use the cap that comes with your ONR. The cap is approximately 0.5oz so you need to add 16 0.5 caps to make 8oz.

Is ONR a quick detailer?

Use as a quick detailer and clay bar lubricant, mix 1oz of ONR to 16oz of water. Favorite product of many high end detailers. Perfect for detailing on the go, those living in apartment complexes, washing in the winter, mobile detailing, etc.

How does ONR work?

With ONR, there’s no buffing. Instead, its formula softens the wash water and attacks dirt at the molecular level. The dirt’s “grip” on your paint is broken as particles are encapsulated in a bubble of slippery polymer, so you’re basically lubricating the dirt away.

Is clay bar lubricant necessary?

Claying a car requires specific action and the right conditions, though, and if you don’t have enough lubricant, you could end up doing more harm than good. Thankfully, there are tons of products on the market that provide a slick coating for your clay bar to glide across.

Can I use car shampoo as clay lube?

Car shampoo, not wash and wax as it can soften clay. Water, add some shampoo, shake then try between your fingers, if it feels slick to touch go ahead, if not add more shampoo. Car shampoo, not wash and wax as it can soften clay.

How do you make a quick detailer?

What you need/Directions:

  • Spray Bottle (24 oz.) …
  • Add 1 teaspoon of Meguiar’s Ultimate Wash and Wax.
  • Add 1/4 to 1/2 teaspoon of Meguiar’s Gold Class Liquid Wax (Shake well)
  • Slowly add some water until the bottle is 1/4 full, you DON”T want suds (If you want to go an extra step you could use distilled water)
  • See More:  How many liters is the biggest JoJo tank?

    More items…•

    How much clay does it take to lubricate a car?

    You’ll only need about 50g to do the whole car. Knead the 1/2 clay bar in your hands until it softens. Spray your clay lubricant over the panel and begin to glide the clay bar in a back and forth motion across the surface.

    Can you dilute clay Luber?

    Use it as a clay lube or quick detailer on the paint, clear coat, glass, wheels, headlights and more. Best of all you can dilute this formula 1:1 for twice the value or simply use it as is.

    Can you clay bar with water?

    All clay bars require a lubricant. Some can be used with water, some work better with a quick detailer spray (liquid suspension of carnauba). Always follow the instructions as noted on the clay bar – if the instructions say to use water, then it has been formulated with this in mind.

    Can I use ONR as clay lube?

    To mix up a 32 oz bottle of clay lube you would use 1 tablespoon (15ml) of ONR.

    How do you mix ONR?

    Mix up a bottle of ONR at a ratio of 64:1 of water: product. Spray the solution liberally onto the panel and onto the clay directly. Clay the car as normal using light-pressure and straight-line motions and fold the clay to expose a fresh, clean side when necessary. Rinse the car and dry when complete.

    Can You Use soapy water to clay bar?

    An alternative to a spray detailing lubricant is good old soapy water. This is ideal if your paint is heavily contaminated. Be sure to rinse your wash mitt thoroughly and use a fresh bucket of soapy water, not what’s left over from washing. After claying one or two body panels, your clay will begin to look dirty.

    See More:  What are the cons of getting a Brazilian wax?

    Can you use car soap with claybar?

    Re: Using car soap and water as a clay lube? Yeah, it`s fine. That`s what I use as a clay lube, although I perform the clay step during the wash process. It`s the same lube though – soap and water.

    What lubricant should I use when using a clay bar?

    Some waterless wash systems can also be used to lubricate the paintwork when using a clay bar. Optimum No Rinse also known as ONR in the detailing world, is a popular option and can be diluted to around 2% in water to work as a clay lubricant.

    How do you Lube a clay car?

    For a lot of cars, using warm soapy water, a quick detailer, or ONR will be enough. As long as you’ve prepped the car well enough before claying, you will not have too many contaminants left on your car. Despite this, I’d still recommend using a dedicated clay lube.

    How do you use optimum no rinse on clay?

    How to Use Optimum No Rinse as a Clay Lubricant Make sure the car is clean and the panels are still wet. Mix up a bottle of ONR at a ratio of 64:1 of water: product. Spray the solution liberally onto the panel and onto the clay directly.

    Can I use waterless wash products as clay lubes?

    Some other waterless wash products can also work as clay lubes. However I always recommend using them with water to provide enough lubrication. Using them on dry paint is very likely to cause swirl marks and marring.